Помощь плагин Geyser-Spigot не работает, версия 1.21.1

после удаление мира и перезапуска на новый перестал плагин работать, ну я пару плагинов допольтельных установил, но не думаю что в них проблема
вот настройки в папке config.yml
bedrock:
# The IP address that will listen for connections.
# Generally, you should only uncomment and change this if you want to limit what IPs can connect to your server.
#address: 0.0.0.0
# The port that will listen for connections
port: 19132
# Some hosting services change your Java port everytime you start the server and require the same port to be used for Bedrock.
# This option makes the Bedrock port the same as the Java port every time you start the server.
# This option is for the plugin version only.

# The IP address of the remote (Java Edition) server
# If it is "auto", for standalone version the remote address will be set to 127.0.0.1,
# for plugin versions, it is recommended to keep this as "auto" so Geyser will automatically configure address, port, and auth-type.
# Leave as "auto" if floodgate is installed.
address: auto
# The port of the remote (Java Edition) server
# For plugin versions, if address has been set to "auto", the port will also follow the server's listening port.
port: 30245
# Authentication type. Can be offline, online, or floodgate (see Floodgate).
# For plugin versions, it's recommended to keep the address field to "auto" so Floodgate support is automatically configured.
# If Floodgate is installed and address: is set to "auto", then "auth-type: floodgate" will automatically be used.


Айпи сервера для джави:

donator8.gamely.pro:30245​

 

bedrock:
  # The IP address that will listen for connections.
  # Generally, you should only uncomment and change this if you want to limit what IPs can connect to your server.
  #address: 0.0.0.0
  # The port that will listen for connections
  port: 19132
  # Some hosting services change your Java port everytime you start the server and require the same port to be used for Bedrock.
  # This option makes the Bedrock port the same as the Java port every time you start the server.
  # This option is for the plugin version only.
  # The IP address of the remote (Java Edition) server
  # If it is "auto", for standalone version the remote address will be set to 127.0.0.1,
  # for plugin versions, it is recommended to keep this as "auto" so Geyser will automatically configure address, port, and auth-type.
  # Leave as "auto" if floodgate is installed.
  address: auto
  # The port of the remote (Java Edition) server
  # For plugin versions, if address has been set to "auto", the port will also follow the server's listening port.
  port: 30245
  # Authentication type. Can be offline, online, or floodgate (see Floodgate (https://github.com/GeyserMC/Geyser/wiki/Floodgate)).
  # For plugin versions, it's recommended to keep the address field to "auto" so Floodgate support is automatically configured.
  # If Floodgate is installed and address: is set to "auto", then "auth-type: floodgate" will automatically be used.

 

@FBM, не работает